International Intergard is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance suitable for use as part of a. International Intergard is a high build high performance two component epoxy finish. Call Intergard should always be applied over a recommended primer coating scheme. The primer surface should be dry and free from all contamination, and.
|Published (Last):||2 April 2008|
|PDF File Size:||16.35 Mb|
|ePub File Size:||6.3 Mb|
|Price:||Free* [*Free Regsitration Required]|
Marine Coatings Marine chemicals Marine lubricants. Multiple coats may be required to achieve specified film thickness.
Industrial Grade AkzoNobel Intergard 410, Packing Size: 20 L
Prices are indicative only and may vary by country, with changes in raw materials prices or exchange rates. If you intergarrd not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product.
This product is no longer in stock. Please ensure you refer to all datasheets for full application information. Low trade prices Our best trade prices on everything!
View Contact Call Seller Now. Do not exceed pot life Limitations. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards.
Always mix a complete unit in the proportions supplied. Capacity 20 Ltrs Form Liquid Brand Akzo Nobel A high build, high performance, two component epoxy intermediate or finish with excellent chemical and abrasion resistance. The question has been correctly sent. I would like to hear about offers and services: International Intergard was not formulated to be used below water line, so we do not have any data.
Recommended Tip Range 0. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units. Send us your question. Intergard A two pack, high build epoxy intermediate or finish coat with good chemical and abrasion resistance.
Store in dry, shaded conditions away from sources of heat and ignition. Typical Coverage per coat 4. Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures.
Industrial Grade AkzoNobel Intergard , Packing Size: 20 L, Rs /litre | ID:
As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating.
VOC values are typical and are provided for guidance purposes only. Use in accordance with the standard Worldwide Marine Specifications. Coal Tar Epoxy Coatings in Mumbai. International International Intergard is a high build, high performance, two component epoxy with excellent chemical and abrasion resistance suitable for use as part of a high performance coating system to provide an anti-corrosive barrier in areas where aggressive corrosion conditions prevail.
Consult your local International Paint representative for specific recommendations. Call Send a quick message.
Water Based Epoxy Coating. Hi Can international intergard be used on the hull of a canal boat and how long before does it last before the boat needs to be taken out of the water to be done again. Where a cosmetic finish with good gloss and colour retention is required, overcoat with recommended top coats. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets.
International Intergard – Rawlins Paints
Application by brush is recommended for small areas only. Kind regards Pamela Lawton.
Get Best Price Request a quote. All surfaces to be coated should be clean, dry and free from contamination. Repair corroded areas ihtergard the specified anticorrosive scheme and apply Intergard within the overcoating intervals specified for the primer consult relevant primer data sheet.
High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. Take precautions to avoid skin and eye contact ie.
Actual safety measures are dependant on application methods and work environment. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. Suitable for use as part of a high performance coating system to provide an anti corrosive barrier in areas where aggressive corrosion conditions prevail.
Year of Establishment Unmixed material in closed containers should be maintained in protected Storage intwrgard accordance with information given in the Storage Section of this data sheet. Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product.